Arduino Tutorial - Servo Motor Control with Joystick | Waqas Farooq

Posted by:



In this tutorial, we will learn how to use multi-servo with Joystick. We will control two pcs servo motor with one Joystick. You can implement your robotic arm projects with reference to this tutorial. Of course we will use external battery / power when doing this.

Code and Schematic Link : https://mega.nz/#!ffZyGaqA!GJVDIFgzeu... In the next tutorial, I'll show you how to control multiple servos control with Android Application via Bluetooth. Connections: The external battery VCC / GND connect to the breadboard. The Arduino GND connect to the breadboard's GND input The servo connections we use in this project are as follows; Orange Input - Signal Input Red Input - Power Input (VCC) Brown Input - Ground Input(GND) The Servo1 VCC and GND connect to the breadboard's VCC / GND inputs The Servo1 Signal connect to the Arduino Digital PWM 3 The Servo2 VCC and GND connect to the breadboard's VCC / GND inputs The Servo2 Signal connect to the Arduino Digital PWM 5 The joystick connections we use in this project are as follows; The Joystick GND connect to the Arduino GND The Joystick VCC connect to the Arduino VCC The Joystick 'X' (in some modules 'H') connect to the Arduino Analog 0 The Joystick 'Y' (in some modules 'V') connect to the Arduino Analog 1 The Joystick 'SW' (switch or button) not connected. Parts :-- Arduino Uno :-- https://goo.gl/yY9Bso Servo :-- https://goo.gl/FD3mRa Joystick :-- https://goo.gl/XAXAkc Male - Male Jumpers :-- https://goo.gl/2CWnMb Male - Female Jumpers :-- https://goo.gl/wZRLR1 Breadboard :-- https://goo.gl/EFcKsL Follow Me on my Social Media Instagram: https://www.instagram.com/waqas_faroo... Twitter https://twitter.com/WaqasFarooq01 Facebook page: https://www.facebook.com/WaqasandUsama/